Air Powered Hockey Carrom Model 752.52
Features:
Heavy cabinet will not move during play, yet it is easy to move for cleaning or vacuuming. Cabinet and legs are covered with a heavy, glossy vinyl which is resistant to wear and use. The vinyl on the legs and the leg materials will resist denting by a vacuum cleaner and use.
New red, white, and blue play surface is especially cold pressed at the factory under a one hundred ton press process to ensure that all playsurfaces are perfectly flat.
Precision air delivery is assured by an enclosed air delivery plenum which is engineered to provide full air delivery to each air hole in the playsurface.
Playing surface is thick High Pressure Laminate - the same as traditional kitchen countertops to ensure long term play and attractiveness.
The graphics are embedded - beneath a layer of clear, wear proof melamine which will not scratch off.
- Playsurface is 1" thick.
- The aluminum rails make for super fast play.
- Rubber Leg Boots assure both a means for perfect leveling and eliminate any table movement associated with a screw in leg leveler.
- Toll free technical and assembly information line allows you to talk directly to an engineer if ever needed.
- Game has an on/off switch.
- Game uses a specifically engineered, UL approved, high output, low noise motor which plugs into any standard electrical outlet.
- Game puck return features no moving parts to ensure easy play and start up after each goal.
- Molded corners eliminate any rough edges while allowing for continued fast play.
- Game assembly takes less than 30 minutes with all necessary parts and complete instructions included with the game for ease of assembly.
- All game components are exclusively engineered by Carrom using its 100+ years of game and toy making experience and expertise.
- Game is UL tested and approved for consumer safety where appropriate.
- This game is finely constructed by Carrom in Ludington, Michigan using only the most durable of construction materials to provide years of rugged playtime enjoyment.
- UL Approved Electric High Output Motor with 100 Cubic Feet Per Minute Air Output
- Aprons are ¾" Thick 45 Pound Particleboard with
- Spektrum Melamine on Exterior
- Playsurface is 1" Thick
- Playsurface is Manufactured Using a Cold Press Process for Assured Flatness
- Playsurface has .060" High Pressure Laminate with Impregnated Graphics for Long Lasting Appearance
- Playsurface is Supported by Steel “beams"
- ABS Puck Catcher is Designed to Eliminate Hang-ups of Puck and for Quick Puck Return
- Puck Catcher Allows for Easy Addition of Optional Scoring Unit
- Legs are Miterfold Construction Covered with Black Vinyl and Legboots for Easy and Accurate Leveling
- Aluminum Side and End Rails Make for Fast Play
- Comes with Round Pucks - 1 Black, 1 Blue
- 6’ Game Table Size when setup - 72 7/16" Long ; 38 7/16" Wide; 31 9/16" High
- 6’ Carton Dimensions – 75 ¼" x 42" x 8" - 14.6 cu.ft.
- 6’ Cabinet Weight Approximately 178 Pounds with Scoring Unit
- Setup Includes Only the Assembly of the Puckcatchers and Legs
Ground Shipping Only
