Surround Air Intelli-Pro XJ-3800 Air Purifier up to 650 sq feet
The Most Complete Air Purifier on the Market.
Sensor technology monitors air quality, performance and filter life. 7 advanced purification stages to remove nearly all pollutant types. With several air-cleaning technologies, Effectively Removes: dust, allergens, mold, micro-organisms, cigarette smoke, odors, chemicals, bacteria and much more.
Test Results: 99.9% Particle Removal in Air Chamber Test.
Air Purification Technologies
- Odor, Dust & Allergen Sensors - Know which airborne pollutants are present. The Intelli-Pro has sensors to detect odors (such as chemicals and cigarette smoke), dust and allergens (such as pollen, pet dander, ragweed and mold spores). There is an LED indicator light for each of these pollutant types. If odors are detected, the "Odor" indicator light on the control panel will become lit. The same for dust and allergens.
- Clean Air Monitor - Know just how clean or polluted the air really is.
- The Intelli-Pro senses just how clean or polluted the air really is, and conveys this information through the four LED indicator lights. The dirtier the air, the more indicator lights that are lit. For example, if all four indicator lights are lit, the air is very polluted. If only one is lit, the air is very clean.
- Automatic Mode - Saves you money on your electric bill by automatically adjusting settings. In this mode, the Intelli-Pro will automatically adjust the settings of the air purifier according to how clean or polluted the air is. For example, if the air is detected to be polluted, it will run the fan on a higher setting. On the other hand, if the air is determined to be sufficiently clean, it will run the fan on the lowest setting ("Quiet") in order to use less electricity, saving you money on your electric bill.
- Filter Replace/Maintenance Indicators - Take the guesswork out of knowing when to replace filters. The Intelli-Pro takes the guesswork out of trying to determine when to replace filters and when to wipe the metal dust collector plates clean. The filter sensor lets you know when it is time to replace the HEPA/activated carbon filter. This way, you do not replace it too soon (saving you money), and not too late, when it becomes saturated to the point it begins releasing captured contaminates back into the air.
- Ion/UV Light Indicator - Now you can know the ionizer and UV lamp are working properly. This sensor verifies the ionizer and UV lamp are working properly. Without these sensors, it is very difficult to know if UV lamps and ionizers are fully operational, since there are few visual or audio signs to verify this. When they are both working properly, the blue light under "Ion/UV Indicator" will go back and forth between dim and bright
Intelli-Pro Specifications:
- Voltage: 100-120 VAC, 60Hz
- Power Consumption: 80 Watts (Highest Fan Setting)
- Negative Ion Output: Up to 60,000,000/cm3
- UV Wavelength: 254 nm (germicidal wavelength)
- Sound Level (dB): Quiet (20), Low (35), Medium (45), High (52)
- Air Volume: 106cfm (Highest Fan Setting)
- HEPA Filter Removal Rate: 99.97% at 0.3 microns
- Dimensions (in): 24 x 13.5 x 10
- Weight (lbs): 15
- Applicable Area: Up to 650 sq. ft.
- Ozone Output: Less than 11 part per billion at 2" away from unit (UL standard is <50ppb)
Coverage Area
- Square Footage Covered: 600 sq. ft.
Guarantees
- Warranty: 3-year warranty
- Return Policy: 30-day money-back guarantee (no restocking fees)
- Replacement Policy: 90-day replacement policy due to factory defect by SURROUND AIR
